ReaSnow Forum
Products => ReaSnow S1 => Topic started by: xTimonek on September 29, 2024, 04:45:24 AM
-
Hello
I am a new owner of Reasnow s1, great product, I play Apex Legends and I feel great, I use the latest beta version of the firmware and manager, I play on Wooting 60he, unfortunately in the digital version, the analog version does not work, I cannot assign the keys even though I have the same Wooting profile as provided by the developer.
Speaking of the Razer Viper v 2 pro mouse, it works, but it often disconnects me in the manager, where I can't test it because it disconnects the manager once every 2 minutes when assigning keys, can you somehow help me with this?
I'm using PS5 connected to p5mate and the p5mate option (1000hz). Mouse in port 1, keyboard wooting port 2, port 3 empty
-
if you would like to setup your reasnow s1 on pc we could help you to manually set it up and give you the best config in the market that would help you reaching your goals in ranked etc ..
https://www.youtube.com/watch?v=ceW6pqK5-sI&list=LL&index=15
join the discord for more information https://discord.gg/HE5phXw8
and also a tip,you have to download hidusbf to oc the ps5mate to 1000hz 1ms polling rate cuz the 1000hz polling rate of ps5 mate is actually 250 on the pc with 4 ms.
-
To use wooting 60HE keyboard on S1, please refer to this topic: http://www.reasnow.com/forum/index.php?topic=4626.0
To use Razer Viper v 2 pro mouse, please refer to this topic: https://www.reasnow.com/forum/index.php?topic=4423.0 Your question may be similar to the one in this thread, which you can refer to
-
@xTimonek
As shown in the picture below,
your mouse and keyboard should be plugged into USB2 and USB3,
When connecting to a P5MATE, USB1 should remain unconnected.
and your S1 should be set to BootMode=P5MATE
(https://www.reasnow.com/download/ReaSnowApp/shared/S1-ports.png) (https://www.reasnow.com/download/ReaSnowApp/shared/S1-ports.png)
-
To use wooting 60HE keyboard on S1, please refer to this topic: http://www.reasnow.com/forum/index.php?topic=4626.0
To use Razer Viper v 2 pro mouse, please refer to this topic: https://www.reasnow.com/forum/index.php?topic=4423.0 Your question may be similar to the one in this thread, which you can refer to
I connected it and it's fine, but I think it's the mouse's fault because it has too large radio waves, which interferes with Bluetooth operation in Reasnow S1 Razer mouse), the problem occurs with Wooting 60he, the video is not active and regular mapping according to profile does not work when mapping the keys.
are you able to fix it?
-
Please show us the following picture/video for troubleshooting the issue
1. A screen-recording video of the io monitor. Please enable the IO monitor(on main page of the ReaSnow Manager App), then press the keys on wooting 60HE
2. A screenshot of wooting 60HE keyboard driver page.
-
https://www.reasnow.com/forum/index.php?topic=4611.0
This is a user who also faced issues using this keyboard. You can refer to this topic
-
https://www.reasnow.com/forum/index.php?topic=4611.0
This is a user who also faced issues using this keyboard. You can refer to this topic
Unfortunately, this error was not fixed as in the case of the colleague above, could you please check it and make a correction?
-
Please show us the following picture/video for troubleshooting the issue
1. A screen-recording video of the io monitor. Please enable the IO monitor(on main page of the ReaSnow Manager App), then press the keys on wooting 60HE
2. A screenshot of wooting 60HE keyboard driver page.
Please show us these items
-
@xTimonek
has your issue with the Wooting keyboard been fixed?
-
@xTimonek
has your issue with the Wooting keyboard been fixed?
Unfortunately no, I'm sure everything is set up the same as yours and it doesn't work, I'll send you a video about the settings later.
-
ok, please provide your details as listed above,
so a timely service can be provided:)