unable to configure thrustmaster TWCS throttle

[ericparlin]

When trying to configure my T16000M stick and throttle I am unable to assign anything due to the s1 seeing inputs that dont seem to exist on the TWCS throttle - the i/o monitor reads RX(-99) and RY(-99) constantly meaning anything i try to remap is assigned to these inputs. Please help:( When I unplug the throttle the stick mapping seems to work fine. Im using this on xbox for war thunder btw. Ive attached a pic of the app showing these inputs. Again, these arent valid inputs.

[richard]

try changing RY and RY Axis' mode, it shall help.
they can be found in the "Joystick and Controller" config -> "More" -> "Joystick"

[ericparlin]

OMG it worked. Thank you so much. I thought I wasted $300 but it works. It feels so good to be free from that crappy TM HOTAS X. I cant say it enough - thank u thank u thank u.

[Khan]

I have a question on this topic. I have the same hotas and am experiencing the same problem. The difference is that the hotas is connected to an Xbone (via Reasnow S1) and the game is unspecified: IO states 99% at all times on these axis.

My question: Where do I find the following: "Joystick and Controller" config -> "More" -> "Joystick".
Is that within Windows, Reasnow S1 or the Game War Thunder?
I can connect the device to the PC to make alterations if need be.

Thanks for any help that you can offer.

[richard]

it's in our APP.
just add the config "Joystick and Controller",
then you will find what you need.

[Khan]

Thank you, Richard.
I don't know how I was missing this - quite clear all of a sudden.