(Sensibilidade de mira Rainbow Six Siege)

[LucasTomaz]

PORTUGUÊS-BRASIL.
Boa tarde! eu sai da comunidade do XimApex e comprei o Reasnow S1 tem alguns meses... E eu notei a falta de precisão na mira do Reasnow S1 comparado ao XimApex, isso pelo menos no jogo Rainbow Six Siege!
assim que eu adqueri o Reasnow S1 por infuencias decidimos criar um grupo para ajudarmos uns aos outros. e todos que jogam Rainbow Six Siege relataram o mesmo problema.  E em nome do nosso grupo e pela comunidade imensa que este adaptador vai se tornar eu vim relatar este problema que esta nos encomodando.
Como sugestão sera que voçês poderiam pegar um XimApex pra fazer essa comparação e deixa com maxima semelhança a sensibiidade de mira ou até mesmo "plagiar" a sensibilidade?

Observação: Eu vi que voçês atendem nossos pedidos as preças, notei que tem duas versões de Rainbow six Siege no adaptador. Agradeço pela atenção de vocês e por se importar com a comunidade, temos muito oque crescer.

INGLÊS.
Good afternoon! I left the XimApex community and bought the Reasnow S1 a few months ago ... And I noticed the lack of precision in the aim of the Reasnow S1 compared to XimApex, at least in the Rainbow Six Siege game!
as soon as i got Reasnow S1 for influences we decided to create a group to help each other. and everyone who plays Rainbow Six Siege reported the same problem. And on behalf of our group and the immense community that this adapter will become, I came to report this problem that is bothering us.
As a suggestion, would you be able to get an XimApex to make this comparison and does it make the targeting sensitivity or even "plagiarize" the sensitivity most similar?

Note: I saw that you fulfill our orders at prices, I noticed that there are two versions of Rainbow six Siege on the adapter. Thank you for your attention and for caring about the community, we have a lot to grow.

[richard]

first of all, thank you for reporting this issue!
we will try our best to help as we always do.

and, we did test our competitor's adapter for R6, and have updated the preset configs according to the feedback
and the updates of the game itself.

as shown in this topic and many others：
http://www.reasnow.com/forum/index.php?topic=2953

Please check the followings:
1. Recommended in-game settings:
Options/Controls:
Vertical Sensitivity = 100
Horizontal Sensitivity = 100
Left Stick Deadzone = 10
Right Stick Deadzone = 10
Controller Rotation = Updated
Controller ADS Sensitivity = Standard
Standard ADS Sensitivity = 50

2. Mouse settings:
5000DPI/500HZ

3. Activated Config in ReaSnow S1
Remove old Rainbow Six config and then add the default "Rainbow Six: Siege(Updated)"

If this fails to help you, please provide more details of yours,
such as your console, firmware and APP versions together with all the settings related to mouse control.

a video will be better to help us understand your issue with R6.

[LucasTomaz]

Então Richard... Acabei de fazer os testes que você pediu, como eu vendi o XimApex pra ir para o Reasnow S1 tive que ir na casa de um amigo testar.
Usei a sensibilidade que vocês pedem que seria a padrão do Reasnow S1 (atualizado) e usei a sensibilidade que o XimApex pede que é a padrão deles também. E ainda continuo achando que o XimApex tem mais precisão na mira, testei com outras sensibilidades também e mesmo assim o XimApex continua com mais precisão...
Eu tenho que deixar uma sensibilidade totalmente diferente da padrão pra chegar próximo a sensibilidade ideal (vou deixar ela com os dados abaixo).
Uma coisa interessante que tem no XimApex é que eles tem o Hz do adaptador e do mouse, já no Reasnow S1 notei que isso não tem.
Observação; não estou dizendo que essa pode ser a solução.
Será que vocês poderiam estar solucionando?
Porque a única idéia que eu tenho até o momento seria vocês plagiar a sensibilidade de Rainbow Six do seu maior concorrente. E como vocês escutam a comunidade com mais força, vocês tem de tudo pra ser o melhor do mercado.

Dados.
Console; Xbox One FAT
APP:1.2.54
Hardware:1.8.8
Firmware:5.3.95
Bootloader:3.6.0

Sensibilidade do mouse;
800dpi
1000hz
Sensibilidade do adaptador;
*HIP: 11,08
Y/X: 1,70
MIN.Speed: 0
Smoothness: 0
*ADS: 3,52
Y/X: 1,70
MIN.Speed: -1
Smoothness: 2
Sensibilidade do jogo;
Sensibilidade Vertical: 100
Sensibilidade Horizontal: 100
Deadzone Esquerdo: 10
Deadzone Direito: 10
Rotação do controle: Clássica
Sensibilidade de mira:
1.0x : 68
1.5x : 107
2.0x : 107
2.5x : 108
3.0x : 109
4.0x : 110
5.0x : 110
12.0x : 168

[richard]

1. ReaSnow S1 will detect all peripherals' USB report and processing the data automatically.
   so no need to worry about that.
2. due to the using of google translate, I don't quite understand what you mean.
do you mean that you find a set of better settings which you prefer,
and recommend that we should take these settings as ours.
============
1. Mouse Settings:
800dpi
1000hz

2. ReaSnow S1 Settings:
HIP Sensitivity: 11,08
Y/X: 1,70
MIN.Speed: 0
Smoothness: 0
ADS Sensitivity: 3,52
Y/X: 1,70
MIN.Speed: -1
Smoothness: 2

3. In-game(R6) Settings:
Vertical Sensitivity = 100
Horizontal Sensitivity = 100
Left Stick Deadzone = 10
Right Stick Deadzone = 10
Controller Rotation = Classic

Controller ADS Sensitivity:
1.0x : 68
1.5x : 107
2.0x : 107
2.5x : 108
3.0x : 109
4.0x : 110
5.0x : 110
12.0x : 168
============
if so we will do a comparison later and get back to you asap.

[LucasTomaz]

What I meant is that regardless of the sensitivity I do in Reasnow I feel that XimApex was more accurate ...
The sensitivity that I went through was the one that I was able to adapt the most, that is, the one that came closest to the sensitivity that I used in XimApex and even so I feel that the sensitivity of Reasnow S1 does not have the XimApex specification.
The HIP sensitivity is perfect, this is a very positive point. Now that of ADS regardless of the sensitivity I put it is not accurate, that is, it passes directly from my target or does not even reach it.
And my idea is as follows;
I don't know if the company Reasnow can make a copy of ADS from XimApex ... But a single idea that I have until the moment you copy a sensitivity of them until you can make a superior one ...

[richard]

I think there is no need to copy their sensitivity settings,
we take a different way to reach the same result in HIP.
we can do it again for ADS.
please just provide some more details of yours, such as the character you are using, weapon, attachment, etc.
can we do the tests in the "situations"
will check it immediately.

and if you can provide a video to show us the difference,
it will be more efficient.
 

[Boblee_sw]

Richard come on. what I’ve been seeing on rainbow six is ​​that when we play in all modes online the hip and ads they get heavy, it seems that the reasnow it loses half of its capacity and is slow it is inaccurate people who see this because I have sure that the problem we are experiencing is this in online modes. because when we play online the ms so it goes up like this making the game heavier think about it please

[richard]

ok, will check and reply later.

[LucasTomaz]

I'm sorry for the delay in answering you, it seems like a lack of interest on my part ...
I know you are able to overcome each obstacle, I believe in the potential of Reasnow S1, so I don't want to go back to XimApex.
Character; Jackal.
Weapon; C7E and Accessories; 2.0x sight, Compensator, Angle cable.
One thing that Boblee_sw said is very true is that the aim is more accurate in "terrorist-hunting" mode. If you have how to correct the error of ADS by doing the tests in a custom with the 10 players or in a casual game to be more efficient.

There is no way I can provide comparison videos with XimApex because my friend who has the adapter lives a long way from me.
But if I stop Reasnow S1 I can provide the video without problems.

[richard]

@LucasTomaz
thanks for providing these details,
we have found some issues in ADS while playing online games of R6.
and are working on it right now.

[LucasTomaz]

It's ok. I will be waiting for a return to alert my group!
Thank you very much for your help and I am happy to be part of this community.

[richard]

sorry for the trouble!
loss of accuracy caused this issue in R6,
and it's been fixed now.
will be released soon after some tests with our latest APP.

[richard]

@LucasTomaz @Boblee_sw
hi,
here is our latest firmware to address this issue,
please upgrade your ReaSnow S1 and try importing the config provided below:
ReaSnow Flash Tool V5.3.99
XBOX ONE_RainBow Six-Siege(Updated)

Test conditions:
1. in-game settings:
Options/Controls:
Vertical Sensitivity = 100
Horizontal Sensitivity = 100
Left Stick Deadzone = 10
Right Stick Deadzone = 10
Controller Rotation = Updated
Controller ADS Sensitivity = Standard
Standard ADS Sensitivity = 50

2. Mouse settings:
5000DPI/500HZ

3. Activated Config in ReaSnow S1
Remove old Rainbow Six config and then add the default "Rainbow Six: Siege(Updated)"

[Boblee_sw]

richard got for ps4?

[Boblee_sw]

Richard the links are also not going.

[LucasTomaz]

good afternoon! I realized that the update link is already available, but I can't access it to do the dawnload. Will you be able to release this same update for PS4?
because in the group that Boblee and I manage there are the guys from PS4 who have the same problems ...

[richard]

Hi,
our cloud server is under maintenance for a while.
the links are available now.

please try it and give us your feedback.

A new R6 config for PS4 will be provided later.

[Boblee_sw]

ok richard i wait for ps4

[Boblee_sw]

richard i turned on my ps4 and did a test. and now what I'm realizing is that the macro messed up everything now when you fire it and shoot the gun it locks where you aimed and you can't move it anywhere

[Boblee_sw]

I did another test here and I realized that it is the new update you passed. I'm from ps4