Author Topic: S1 reads PC as Switch  (Read 6237 times)

TL03

  • Newbie
  • *
  • Posts: 1
S1 reads PC as Switch
« on: January 27, 2024, 10:36:19 PM »
After using my Reasnow S1 with no problems for over a month, it has recently started to boot at a different colour as the one designated as my default profile. When I open the app, I notice it believes it has been plugged into a switch. I have manged to fix it before but it seems it is a 50/50 and it happens on every port on my PC. I also use a Reasnow C1 cable. I am happy to provide any additional information to get this solved. Cheers,
Tom

Austin

  • Global Moderator
  • *****
  • Posts: 1141
Re: S1 reads PC as Switch
« Reply #1 on: January 29, 2024, 10:21:29 AM »
1. You can uninstall the Pro controller driver on your PC
2. Use the firmware upgrade tool, and change boot mode to XB360(PC)

RobertPScott

  • Newbie
  • *
  • Posts: 1
Re: S1 reads PC as Switch
« Reply #2 on: September 27, 2024, 04:06:13 PM »
The issue of the Reasnow S1 reading the PC as a Switch is a common frustration for users. It highlights the importance of proper drivergeometry dash deadlockedmanagement and firmware installation.
« Last Edit: September 27, 2024, 05:21:31 PM by RobertPScott »