Author Topic: Delay and Sensitivity  (Read 6682 times)

kun_84

  • Newbie
  • *
  • Posts: 9
Delay and Sensitivity
« on: August 13, 2023, 06:51:44 AM »
Hi all,

This morning my S1 has arrived and i started to use it. Really simple to set up, connect, update an be recognized by the system.

I?m using m&k on PC, connect to s1 to simulate controller and i play warzone 2.

I figured out two problem ATM:

1) seems to be a delay when i play. I mean when i use directly m&k the game feels more ?real time? then when i?m using S1.. in the app i set delay 0 both hip and ADS and set polling rate at 500mhz.. is there anything i?m missing ?

2) in the game i?ve followed the manual and set everything on MAX for Sensitivity, then i use the app to set hip and ads sens. The problem Is that i found out the right hip Sensitivity for movment (like the one i had on mouse) but when i aim and use ADS, the sens Is completely different.. i?m used to have same sens on hip and ADS but even if the Sensitivity is the same on the app for both, the ADS sens in game is too low and slow then the hip one.. any suggestion about other config to do ?

Is there a manual for the app?

Thanks

elecg2

  • Newbie
  • *
  • Posts: 17
Re: Delay and Sensitivity
« Reply #1 on: August 13, 2023, 05:28:37 PM »
Set 1000hz pooling , um using this on s?ries x.
High dpi, i use 10.k.
Hip no delay.
Ads 220 delay
You need find best sensivity for hip and ads, in game i use 2x multiplyer for Ads. My sensivity os 1.45 hip and 1.35 ads.
With this setup i play like Xim Apex but with more micro control.

kun_84

  • Newbie
  • *
  • Posts: 9
Re: Delay and Sensitivity
« Reply #2 on: August 13, 2023, 05:42:30 PM »
Set 1000hz pooling , um using this on s?ries x.
High dpi, i use 10.k.
Hip no delay.
Ads 220 delay
You need find best sensivity for hip and ads, in game i use 2x multiplyer for Ads. My sensivity os 1.45 hip and 1.35 ads.
With this setup i play like Xim Apex but with more micro control.

First thanks for the answer!

I?ll try with 1000 polling rate but i can?t change dpi beacuse on m&k i use 800 dpi and 2.8 in game sens.. if i put 10.000 dpi my sens should be smth like 0.2 and is to low to be accepted by the game.. i?ll try with your settings.

Why do u use delay on ads? When you fight the ads should be ?instant?

Other question, should i modify curve settings? I would like to have the same sens on rotation everytime and not faster rotation when i push mouse faster..

And what is x/y ratio? I would like my sens to be the same on horizontal and vertical like is on m&k..

Thanks and sorry but i?m new in S1 world

elecg2

  • Newbie
  • *
  • Posts: 17
Re: Delay and Sensitivity
« Reply #3 on: August 13, 2023, 06:37:36 PM »
Use Gradual in game snd on ads add 220 delay, thats the same Xim config.
High dpi helps turno fast without reaching turn Speed limit.  Its hard to configure, try my settings changing dpi to your prefer?nce. I never chance curves .

elecg2

  • Newbie
  • *
  • Posts: 17
Re: Delay and Sensitivity
« Reply #4 on: August 13, 2023, 06:49:28 PM »
X and y ratio is the Speed of vertical and horizontal, i stay with defaults

Austin

  • Global Moderator
  • *****
  • Posts: 1141
Re: Delay and Sensitivity
« Reply #5 on: August 14, 2023, 09:55:43 AM »
@elecg2
Thanks for your reply.

Austin

  • Global Moderator
  • *****
  • Posts: 1141
Re: Delay and Sensitivity
« Reply #6 on: August 14, 2023, 09:57:12 AM »
@kun_84
Here're some manuals. Maybe that will help.
http://www.reasnow.com/forum/index.php?topic=2612.0