Imput lag

[Liry72]

Hello. your device has a very large mouse lag! it was not in the old firmware 5.4.22, but all the new ones have it! your device is not playable, it is impossible to aim accurately! no settings help!
logitech g102 mouse
please solve this problem as soon as possible I'm tired of it
here is a video of settings and imput lag!

https://youtube.com/shorts/DTj2M33yjJI?si=TiulJgaKC9xe8LQE
https://youtube.com/shorts/Q8l-StTe0DY?si=gh-ychuasB8HH0FU
 

[Austin]

In Edit Config-Scenarios-More, there's an option called Aim Stabilizer, see if it is turned on. Turning this function on may affect the input delay. I saw the video you sent, I don't understand Russian, sorry about that.
And I see you use S1 on PS5 with PS5(P5 Mate) mode, you're using a P5 Mate, right? How about making a test with the PS4 version of Apex Legends, using S1 with a PS4 controller?

[Liry72]

Hello. yes I use reasnow s1 along with p5mate. I also connected directly via dualshok and launched the version for ps4, everything works, there is also imput lag.
in the ps5 version 120fps is not visually visible, but still there is no accuracy. I tried changing the anti-aliasing and turning it off but nothing changes. I changed the x/y ratio to 1.80, it got better, but it didn?t completely solve the problem!
in old firmware before 5.4.22 there were no such problems at all!

[Liry72]

I used to play pre-PS4 games with firmware 5.4.22 on PS4 and PS5 and everything was great! then I bought reasnow d1 and updated the firmware and these problems started, I recently bought p5mate and installed the latest update but this problem with imput lag remained.
I think the problem is in the changed mouse signal logic.
is it possible to choose between the old mouse logic and the new IE 3.5?
thanks for the answer!

[devilsaurus]

@Liry72
Yes you are right I remember when I was using 5.4.22 version on ps4 it was all great, but now it is not in newer versions. Rightnow I am on PS5 120fps but there is not problems with inputlag, but if i switch to 60fps (ApexLegends) omg it is unplayable.

[Austin]

1. Newer versions of firmware will only work better than older versions, and it's unlikely that what you're saying about older versions will work better.
2. We analyzed the video you sent and found there might be some issues with the mouse dpi setting. We recommend for 5000dpi/500Hz. Please take a screenshot of your mouse's driver(dpi setting), it will help us analyze the issue better.

[Liry72]

when I switch to 500 or 1000Hz the s1 device freezes periodically! and you have to reboot it, there are no freezes at 250Hz!

[Austin]

when I switch to 500 or 1000Hz the s1 device freezes periodically! and you have to reboot it, there are no freezes at 250Hz!

Using G102, right? We have a G102, and we made a test, everything is fine.
It's better to upload the GHUB/LGS dpi setting page screenshot.