Connection to PC

[Divor]

Hello! Sorry for the bad English! Yesterday I just got my Reasnow S1 from the store. I updated the firmware, but when I connect the joystick, mouse and keyboard in accordance with the instructions (I connect to the PC, because this possibility was announced by the developers in this thread http://www.reasnow.com/forum/index.php?topic=2622.0 ), the device starts flashing red-blue-green. I saw that according to the instructions this is an unstable connection between a PC and S1 / connection to USB 3.0, but I tried different USB cables and different USB 2.0 ports, without changes. I turned off the mouse / keyboard backlight. Keyboard: razer blackwidow chroma v2, mouse - razer naga trinity, controller - razer sabertooth. The controller is officially licensed for the Xbox360 and is also defined in the system in the same way, it has never been a problem. What could be the problem? Thanks!

[richard]

Hi Divor,
sorry, we did find a bug in the support for PC,
and will provide a new firmware to address your issue.

[Divor]

Hi Divor,
sorry, we did find a bug in the support for PC,
and will provide a new firmware to address your issue.

Hi, richard!
Thanks for the quick reply. I will wait for a new firmware!

[richard]

Hi Divor,

Here is the latest firmware, please upgrade your ReaSnow S1 with it.
http://www.reasnow.com/download/ReaSnowApp/ReaSnow%20Flash%20Tool%20V5.3.68.zip

Support for PC has been improved,
no controller is required to be connected to USB 1 port of S1,
so please just leave USB 1 open and connect your ms and kb to USB 2 and 3.

S1 will enter PC mode automatically.

And to force S1 into PC mode, you can also press S1's button during the red light
while S1 is powered up.

PS. the preset games are limited right now,
if you need more ones, please post them here:)
we would love to help.

[Divor]

Hi, richard!

Everything works just perfect, thanks! Now S1 is automatically detected in the system as an Xbox360 gamepad without physically connecting the gamepad, excellent! Please tell me, is it possible to make S1 be defined in the same way as the Xbox One / PS4 gamepad?

P.S. Need Destiny 2 preset

[richard]

is there any different to use S1 as Xbox One or PS gamepad than Xbox 360 gamepad?

ok, will add destiny 2 later:)

[Divor]

is there any different to use S1 as Xbox One or PS gamepad than Xbox 360 gamepad?

ok, will add destiny 2 later:)

Some game difference still there, and support for the Xbox 360 is over, as you know For PS4 - in general, a different control in games!

Thank you! In any case, you have already helped a lot, I will wait for the Destiny 2 preset!

[richard]

Destiny 2's preset has been added, give it a shot:)

[Divor]

Destiny 2's preset has been added, give it a shot:)

Thank! I edited it a bit for myself) The accuracy of aiming is simply amazing, but with the sensitivity of the turn, everything is not so good. Setting the mouse sensitivity, initial speed and ballistic curve turned out to be not too difficult, but with quick turns this game has obvious problems)) So far I have exhausted ideas on how to improve the speed / sharpness of the turn. Give some advice?

[richard]

due to that your mouse and keyboard have been turned into a controller,
sharp and fast turning will be limited.
will have to accommodate yourself to the changed situation:)

[Acdcs]

device. Can I use it on a computer? I want to play warzone 3. With keyboard and mouse. And I want to activate aim assist. Is this possible? Please someone let me know, thank you. And how should I make the connection? Any joysticks? Do I need to connect it?

[Austin]

No controller/joystick is needed. You can refer to this manual: http://www.reasnow.com/download/ReaSnowApp/ReaSnow%20S1-UserManual.pdf

[Acdcs]

So, does aim assist work when connected to the computer and what are the advantages of using it on the computer?

[Austin]

It depends on the game. Some PC games don't have aa when playing with a controller.
Advantages: use macros, get aa.

[Acdcs]

How do I connect the computer to the device? How does the connection work?

[Austin]

Just connect ReaSnoe S1 to the PC directly. No controller is needed.

[Ragnarok]

Hi Austin,i tried to play Xdefiant on PC as my first experience with the S1 on PC like i told u in a post.İ am happy that i don't need a controller for it.But i have the same rainbow color error as the creator of this topic.İ tried all my standart usb ports(2, 3.1 gen1 and gen 2) but got the same error.İ still can plug it in for updates with no problem,it works still on my PS4.The next step i tried was to use a different cable  for the connection between PC and S1 so iused 2 cables.. one new one and the one of my cronus zen.But unfortunately still same error.After searching in the web,i found this topic.Hope u can help me.
Firmware v5.6.171 and app v1.6.24
Windows 11

[Austin]

http://www.reasnow.com/forum/index.php?topic=3025.0
On this page, "PS3: To use ReaSnow S1 on a PC, you might update the XB360 controller driver first.
Please follow these steps: https://ibb.co/6BNM1FR Download Link: https://community.pcgamingwiki.com/files/file/2630-xbox-360-accessories-software-v12/"
Did you do that? Or you can downgrade the firmware to 5.6.152. Version 5.6.152 firmware doesn't need to update the XB360 controller driver.

[Ragnarok]

Hi Austin,yes doing that solved my problem without the need to downgrade the firmware.Thanks a lot for that.