Author Topic: Reasnow s1 connection fail (Read 4893 times)

mhancer · « **on:** September 18, 2023, 07:38:16 AM »

Hello,
during the game, the S1 beeps like in the video. All cables have been renewed. All steps in the forum have been done. But the problem was not fixed.

https://youtube.com/shorts/PMtWvJ-lDyU?si=wOaP1jM_A2vIqUnW

Austin · « **Reply #1 on:** September 18, 2023, 09:55:30 AM »

Are u using M&K with RGB lights? If you are using that M&K, try to turn off the lights.
Also, you might change the USB port on the console.

mhancer · « **Reply #2 on:** September 18, 2023, 03:57:21 PM »

Yes, it has K/M RGB feature. I will close it and try again.

mhancer · « **Reply #3 on:** September 19, 2023, 05:05:28 AM »

Hello, my problem is not solved. I tried M/K non rgb. The same problem occurs again.

mhancer · « **Reply #4 on:** September 19, 2023, 05:17:39 AM »

Austin · « **Reply #5 on:** September 19, 2023, 09:52:11 AM »

If you don't connect the M&K to S1, will things get better?

mhancer · « **Reply #6 on:** September 19, 2023, 08:02:48 PM »

I tested it in an offline game. No problems with just gamepad without k/m. How do I solve this problem? I would be very happy if you guide me.

Austin · « **Reply #7 on:** September 20, 2023, 10:11:38 AM »

Just a gamepad, without M&K? Maybe your M&K caused the problem. You can replace a new one or contact the manufacturer for help.