« previous next »
Pages: [1]

Author Topic: S1 disconnect recently and stable blue  (Read 3574 times)

Momo

  • Newbie
  • *
  • Posts: 6
S1 disconnect recently and stable blue
« on: April 20, 2022, 01:16:17 PM »
firmware is 5.5.6. unplug and replug it will solve this but it's Keep appearing is kinda annoying.
Logged

Momo

  • Newbie
  • *
  • Posts: 6
Re: S1 disconnect recently and stable blue
« Reply #1 on: April 20, 2022, 04:15:13 PM »
stable blue with 1 beep. it says instantaneous high-load current on the manual. what does that mean.
Logged

Momo

  • Newbie
  • *
  • Posts: 6
Re: S1 disconnect recently and stable blue
« Reply #2 on: April 21, 2022, 12:51:56 AM »
Sometimes with four beeps. what should I do? Do I have to buy a new one?
Logged

richard

  • Global Moderator
  • *****
  • Posts: 4885
Re: S1 disconnect recently and stable blue
« Reply #3 on: April 21, 2022, 10:25:41 AM »
if it's blue with 1 beep, here are some tips for you
1. try some new USB cables for your controller
2. try replacing some peripherals which are connected to ReaSnow S1
3. ESD protection

Please check this page for more details and description of ESD:)
https://en.wikipedia.org/wiki/Electrostatic_discharge

how to get rid of ESD:
https://fosterpandh.com/blog/how-to-get-rid-of-static-electricity-in-your-home
https://housewifehowtos.com/clean/how-to-get-rid-of-static-electricity/

if it's blue with 4 beeps, and it shows repeatedly.
that is a hardware failure.
then you will have to contact the seller for a Warranty and Repairs.
Logged
Pages: [1]
« previous next »