Crosshair connect to Cronusmax plus

[Kirka24128]

Hello, tell me please, is it possible to connect cronusmax plus to crosshair Reasnow.  I know that xim apex can be, but can it be done with crosshair?  Thank you in advance!

[richard]

currently, cross hair can accept cronusmax's signals(scripts or not).
but cronusmax will not accept cross hair's output.
so it depends on how you are going to use them.

[Kirka24128]

For a macro that is filled in cronusmax plus.  And does it make sense to use cronusmax?  Thanks for the quick response.

[richard]

yes, if cronusmax is connected to USB PORT 2/3 on cross hair,
its macro can be recognized by cross hair.

[Kirka24128]

That is, directly to the crosshair?  Without a hub?  And how then to connect the keyboard or mouse?

[richard]

USB hub is OK, cross can recognize many hubs.

[Kirka24128]

I apologize, I did not quite understand how to connect it to the 2/3 port.  and the mouse or Klava then where?  And what combinations should be carried over cronusmax in order for the crosshair to see it?  Just cronusmax refuses to perceive the crosshair.

[richard]

please read page 5 in our user manual, which can be found here:
http://www.reasnow.com/forum/index.php?topic=28.0

connect your USB hub to port 2/3,
then connect your kb/ms to this hub,
and cronusmax to the remaining port on cross hair.

[Kirka24128]

cronusmax refuses to work, did everything as you said

[richard]

try sending a single R2 from cronusmax to cross hair,
and let us know the result.
any more support in need, please provide some more details, such as wiring, settings, etc.
a video or some screenshots will be better.

[Kirka24128]

Сейчас заметил что hub не выводит почему клавиатуру, поменял два hub,  и все равно не выводит, а на прямую может.

[Kirka24128]

Now I noticed that the hub does not display why the keyboard, changed two hubs, and still does not display, but it can direct.  (Sorry for the above)

[Kirka24128]

Is it possible to insert the mouse and cronus in the hub, and the keyboard separately?

[Kirka24128]

https://youtu.be/8R8YPOv9NB8

[richard]

thanks for the details!
your question has been forwarded to our R&D team,
will reply later.