ReaSnow Forum
Products => ReaSnow S1 => Topic started by: 컴퓨터 비전 on August 16, 2024, 05:43:30 AM
-
Can you use the analog mode on the wooting with the reasnow yet? This helps combat mousetrap, allow far better aim assist interaction etc.
-
Okay so after testing it, it doesn't work. Only digital input works, an analog input with the reasnow would bring it to a new level, please implement it.
-
We improved compatibility with wooting keyboard, please refer to this topic: http://www.reasnow.com/forum/index.php?topic=4626.0
-
for some reason it won't let me install the iOS App 1.6.28? it just keeps going to 1.6.27
-
Could you take a screenshot for us? Everything is fine on our side.
-
okay so it wont let me send a screenshot on iOS, but ill describe it as soon as i click the testflight link it redirects me to the firmware 1.6.27.3 - P5MATE support.
And if I click app details it says release date: 26th July
Works now i have the 1.6.28
-
How do i apply left stick inputs with the wooting on the reasnow app? like the wsad but analog version?
Like the LS Up etc on the right side.
-
Do you mean by editing the button layout? Please refer to the pictures below.
https://ibb.co/JpWjtwC
https://ibb.co/YjFLTNs
https://ibb.co/xCVDM3n
-
I meant how to get the wooting on the left stick layout, it doesn't work otherwise. I've imported your wooting layout and the wsad analog mode doesn't respond on the left stick layout or anything.
-
Please refer to this video: https://youtu.be/bxXawYUuA_4
-
When you click the left stick mapping and have the wooting in analog mode, it doesn't respond.
The video doesn't explain how to get the analog controls into the left stick menu.
I've tried the Converted Controller and Authentication Controller configs to get the bindings, but to no avail.
Wooting:
I've enabled Xbox Controller mode
cancelled WASD for analog mode
applied the analog mappings to WASD
Reasnow:
The analog mappings do not respond when you try to remap them to the left stick mappings on hip, ads and other sub-profiles
Versions:
Firmware: 5.6.181
APP: v1.6.28
-
Open the io monitor, and see if there's any input from the keyboard. A screen recording video is better.
And you need to use firmware V5.6.181
You need to switch profile when using this keyboard.
Just use a regular MnK config file and remap the button layout as I said before.
-
No response from the I/O Monitor when using analog mode on wooting - the analog mode works on the xim and pc perfectly tho?
I am running 5.6.181
I do switch profile when I'm using the keyboard, i have a mode button i mapped and it switches between digital and analog.
I am using a regular config (Call of Duty: Modern Warfare 3)
.
I just reset the reasnow and updated the firmware again, the analog still doesn't map to the left stick nor respond.
-
https://ibb.co/TMS4985
I need a screenshot like this
-
Here: https://ibb.co/qLHmLB1
oh did you mean without the analog bindings?
Same result: https://ibb.co/8KZKB5L
This is a new created one, the other bindings are for xim n stuff.
-
Hi,
The following are the changes we made in S1 and the Wooting keyboard. Please compare these five pictures with yours. If everything is set as shown in these pictures, your Wooting keyboard shall work with S1 without any problem.
W-01
https://ibb.co/jhvCB7f
W-02
https://ibb.co/TtQX9pT
W-03
https://ibb.co/NT5L3PY
W-04
https://ibb.co/DLg8mgh
W-05
https://ibb.co/1MfTstm
-
My keyboard matches everything on the wootility, it just doesn't let me bind the analog mappings to the left stick menu in the reasnow app, when i attempt to bind them. It doesn't respond and the Left stick binding is just Listening.
The problem is that It won't let me get the left stick bindings on the app.
-
1. Can you provide your wooting keyboard settings again as shown in W-04 and W-05?
your previous screenshots are inaccessible by now:
https://ibb.co/qLHmLB1
https://ibb.co/8KZKB5L
2. have you switch to the 2nd profile in your wooting keyboard by FN+ENTER?
so the correct profile can be activated.
-
Here is the W-04 : https://ibb.co/p2Mncv2
Here is the W-05 : https://ibb.co/Q6qJjh3
And i use a mode button to switch to the analog mappings, but i did try the FN+ENTER to switch. but it has the same problem.
-
No your settings are different from ours, please check this pic.
https://i.postimg.cc/28cf0Yc3/Diff.png
you should clear all other mappings for WASD, and keep the analog mappings in "Gamepad Mapping" page only.
-
It doesn't let me do that.
the analog buttons show up either way.
I don't know why yours are gone from the the menu and only show up on the gamepad mapping page only.
Mine shows up on both the wooting 60he and wooting one.
Your wooting code imported: https://ibb.co/GRGdfH1
-
Hi,
we will need a video from you, it might help us to figure this issue out.
1. enable I/O monitor in our ReaSnow Manager APP, and start a screen recording on your smartphone
2. and then switch your Wooting keyboard to the 2nd profile by FN+ENTER
3. press WASD on your Wooting keyboard repeatedly and slowly, so we can check its outputs to S1
please upload this video to Youtube or some other file sharing servers,
and post its URL here.
-
@컴퓨터 비전
How is your wooting keyboard issue?
Can you provide the video mentioned above?
-
still doesn't work.
just struggling to upload the file cause its ''too big'' or something.
-
You can upload it to YouTube, or e-mail it to us. support@reasnow.com
-
PLEASE follow this video carefully
https://youtu.be/bxXawYUuA_4
issue with wooting keyboard+s1 will be solved easily.
PS1: Gamepad Mode = Xbox controller, this is very important!
PS2: clear WASD keys or enable "Gamepad mapping override" feature
-
Hello, I've followed everything on the vid. I'm just trying to get the remapped wasd on the left stick menu as analogue inputs, how do I go about getting the new analogue outputs on the left stick menu?
-
can you join our discord and open a ticket there?
https://discord.gg/Q9mnQc4ja9
it will be more efficient for our communication